Gateway HX2000 Bedienungsanleitung PDF herunterladen (Seite 15)

www.gateway.com

Troubleshooting

If you have problems with the monitor, the information in this troubleshooting section may help

you solve them.

No power

Make sure that the power cord is connected correctly to both the back of the monitor and the

wall outlet. For more information about connecting the power cord, see “Connecting the monitor”

on page 2.

No picture

• Press (Menu), then (Input) to make sure that you have selected the correct video source.

• Make sure that the power cord is connected correctly to both the back of the monitor and

the wall outlet. For more information about connecting the power cord, see “Connecting the

monitor” on page 2.

• Make sure that the video cable is connected securely to the back of the monitor and

computer. For more information about connecting the video cable, see “Connecting the

monitor” on page 2.

• Make sure that the monitor is turned on.

• If the power LED is orange:

• Make sure that your computer is turned on.

• Move the mouse or press any key on the keyboard to bring the monitor out of sleep

mode.

• Restart your computer with the monitor turned on.

• Make sure that the video cable is not damaged.

• Check the end of the video cable for any pins that might be bent or pushed in.

• Turn off the monitor and unplug the video cable from the back of your computer. Turn the

monitor back on and wait for ten seconds. If the monitor is functioning correctly, a “No

Signal” message appears. For more information about connecting the video cable, see

“Connecting the monitor” on page 2.

Display colors are wrong

• Press (Auto) to automatically adjust the display image to the ideal settings.

• Restart your computer with the monitor turned on.

• Make sure that the video cable is connected securely to the back of the monitor and your

computer. For more information about connecting the video cable, see “Connecting the

monitor” on page 2.

• Make sure that the video cable is not damaged.

• Check the end of the video cable for any pins that might be bent or pushed in.

Important

Make sure that the monitor has warmed up for approximately 30 minutes before

making any judgments about the picture quality.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 25 26

Keine Kommentare

Gateway HX2000 Bedienungsanleitung Seite 15