Gateway Ultra2 Bedienungsanleitung PDF herunterladen (Seite 78)

ADAC Ultra2 S466 Hardware Guide

SCSI Termination, Continued

Connecting Non-Disk SCSI Devices SCSI Tape drives, scanners, CD-

ROM drives, and other non-disk drive devices must each

have a unique SCSI ID regardless of the SCSI channel they

are attached to. The general rule for Unix systems is:

• tape drive set to SCSI ID 2, and

• CD-ROM drive set to SCSI ID 5.

Make sure that no hard disk drives are attached to the same

SCSI channel as the non-disk SCSI devices. Drive

performance will be significantly degraded if SCSI hard

disk drives are attached to this channel.

Warning

Since all non-disk SCSI devices are single ended, it is not

advisable to attach a non-disk device to a ADAC Ultra2 S466

RAID controller if LVD disk drives are also attached because the

SCSI bus will then operate in single ended mode.

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 111 112

Keine Kommentare

Gateway Ultra2 Bedienungsanleitung Seite 78