Gateway Computer Drive Bedienungsanleitung PDF herunterladen (Seite 33)

Configuring the BIOS

www.gateway.com

5 Specify which devices you want to boot from, and in which order.

■ To specify your 3.5-inch, 1.44 MB diskette drive, select Floppy.

■ To specify the Zip drive, select Floptical if your computer is running

AMI BIOS, or select

Iomega Zip if your computer is running Phoenix

BIOS.

6 If your BIOS contains the option Removable Devices, set the boot order for

your multiple drives, then press E

SC.

7 If you removed the 3.5-inch diskette drive and did not replace it, go to

the next step. Otherwise, go to Step 10.

8 Press the right arrow key to display the Advanced menu, then press ENTER

to open the

Peripheral Configuration menu.

9 Set Floppy Disk Controller to Disabled, then press ESC.

10 Press the F10 key, then press ENTER.

■ If you installed a diskette, CD, or DVD drive, the installation is

complete.

■ If you installed a Zip drive, go to “Installing Zip drive software” on

page 30.

■ If you installed a Seagate tape drive, go to “Installing Seagate tape drive

software” on page 31.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 57 58

Keine Kommentare

Gateway Computer Drive Bedienungsanleitung Seite 33