Gateway 9715 Bedienungsanleitung PDF herunterladen (Seite 108)

103

www.gateway.com

PCI expansion cards

6 Push the top of the card retention clip for the slot you are using down slightly, then

rotate it out the back of the case to open it.

7 If necessary, remove the expansion slot cover for the slot you are using by sliding it

up from inside the chassis.

8 Align the card with the slot, then press down to seat the card in the slot. If you are

installing a full-length card, slide the front of the card into the front PCI card guide.

You can slightly rock the card end-to-end to seat it, but do not bend the card sideways.

9 Rotate the card retention clip into the chassis to the closed position.

10 Connect any required cabling to the card.

11 Enable the new PCI card:

If you are using the operating system hot-plug interface wait for the interface to appear

on your monitor, then confirm the device to be enabled.

- OR -

Caution

Some accessory/option card outputs exceed Class 2 or power source

limits and therefore must use appropriate interconnecting cabling in

accordance with the national electrical code during installation.

8510702.book Page 103 Thursday, July 7, 2005 11:21 AM

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 277 278

Keine Kommentare

Gateway 9715 Bedienungsanleitung Seite 108