Gateway 9715 Bedienungsanleitung PDF herunterladen (Seite 162)

157

www.gateway.com

Updating the BIOS

2 Turn off the server, then disconnect the power cords and all other cables connected

to the server.

3 Follow the instructions in “Opening the server case” on page 66.

4 Remove the jumper across pins 1-2 of jumper J4A3 (the BIOS Recovery jumper), then

place the jumper across pins 2-3.

5 Insert the DOS-bootable recovery media into a USB port.

6 Reconnect the power cords and turn on the server. The BIOS recovery is initiated.

One beep indicates that the recovery media is valid and that the flash update has

started. The system BIOS initializes the text console and display the progress of the

recovery.

The update will take approximately two minutes and completion will be indicated

by two beeps and a completion message on the screen.

Caution

Moving the jumper while the power is on can damage your server.

Always turn off the server and unplug the power cords and all other

cables before changing the jumper.

Important

The new flash BIOS image will not fit on a diskette.

J8C1 J8C2 J8C3

FRB3

Disable

BMC

Reset

FWHID

8510702.book Page 157 Thursday, July 7, 2005 11:21 AM

1 2 ... 157 158 159 160 161 162 163 164 165 166 167 ... 277 278

Keine Kommentare

Gateway 9715 Bedienungsanleitung Seite 162