Gateway 9715 Bedienungsanleitung PDF herunterladen (Seite 71)

www.gateway.com

Chapter 4: Installing Components

Opening the server case

Because the components inside your server are extremely sensitive to static electricity, make

sure that you follow the instructions at the beginning of this chapter to avoid static

electricity damage.

To open the server case:

1 Follow the instructions in “Preventing static electricity discharge” on page 65.

2 Turn off the server, then unplug the power cords and all other cables connected to

the server.

Warning

The total power requirement for this server exceeds the 240 VA

energy hazard limits that define an operator accessible area.

Therefore, only qualified technical individuals should access the

processor and non-hot-plug I/O areas of the server while the system

is energized. Power cords should be removed from the system before

accessing not-hot-plug areas.

Caution

For correct cooling and air flow, always reinstall the side panel and

the air duct (if included) before you turn on the server. Operating the

server without the cover in place can damage server components.

Warning

This server may have two power cords. To disconnect internal

AC power, you must unplug both power cords.

8510702.book Page 66 Thursday, July 7, 2005 11:21 AM

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 277 278

Keine Kommentare

Gateway 9715 Bedienungsanleitung Seite 71