Gateway 9715 Bedienungsanleitung PDF herunterladen (Seite 118)

113

www.gateway.com

Processors

7 Remove the heat sink by lifting it from the processor.

8 Press down on the processor locking lever, push it slightly away from the processor,

then rotate the lever a full 135° to release the processor.

9 Remove the processor and place it in an anti-static bag or its original package.

10 Install a replacement processor or processor thermal blank in the processor socket.

For instructions on installing a processor, see “To install a processor:” on page 114.

11 Replace the processor air baffle by following the instructions in “Removing and

installing the processor air baffle” on page 67.

12 Follow the instructions in “Closing the server case” on page 72.

Caution

The heat sink has Thermal Interface Material (TIM) on the bottom.

Be careful not to damage this material when you remove the heat

sink from the processor.

If removing the heat sink also pulls the processor out of the processor

socket, the processor could be damaged. Check the pins on the

processor to make sure they are not bent or damaged.

Tips & Tricks

To aid in separating the heat sink from the processor, turn on the

server for a few minutes prior to attempting to remove the processor.

This will warm the thermal interface material and help prevent the

processor from pulling out of a closed socket. Make sure the heat

sink is cool to the touch before attempting to remove it.

If the heat sink still sticks to the processor, twist it slightly to release

it, then try again.

8510702.book Page 113 Thursday, July 7, 2005 11:21 AM

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 277 278

Keine Kommentare

Gateway 9715 Bedienungsanleitung Seite 118