Gateway 9715 Bedienungsanleitung PDF herunterladen (Seite 164)

159

www.gateway.com

Updating the BIOS

3 Remove the jumper across pins 1-2 of jumper J4A3, then place the jumper across

pins 2-3.

4 Follow the instructions in “Closing the server case” on page 72.

5 Insert a DOS-bootable CD (SCCD or current SUP CD) into the CD drive or a

DOS-bootable USB disk-on-key containing a valid BIOS image into a USB port. For more

information on creating a current SUP CD, see “Creating a DOS-bootable System

Update Package (SUP) CD” on page 42.

6 Reconnect the power cords and turn on the server. The BIOS recovery is initiated.

While the BIOS is being recovered, the monitor displays a blue screen and the server

will beep continually. The process is complete when the server stops beeping.

7 Remove the bootable USB disk-on-key or CD.

8 Turn off the server, then disconnect the power cords and all other cables connected

to the server.

9 Follow the instructions in “Opening the server case” on page 66.

10 Place the jumper back onto pins 1-2.

Important

The new flash BIOS image will not fit on a diskette.

J8C1 J8C2 J8C3

FRB3

Disable

BMC

Reset

FWHID

8510702.book Page 159 Thursday, July 7, 2005 11:21 AM

1 2 ... 159 160 161 162 163 164 165 166 167 168 169 ... 277 278

Keine Kommentare

Gateway 9715 Bedienungsanleitung Seite 164