Gateway 9715 Bedienungsanleitung PDF herunterladen (Seite 86)

www.gateway.com

Installing drives

2 If you are replacing a failed drive, determine which drive has failed by checking the

drive status LEDs on the front of the drive carriers.

3 Remove the drive carrier by pressing the drive latch and pulling the drive tray lever

to the right (away from the server), then pull the tray straight out of the server.

4 If you are replacing a hard drive, remove the four screws that secure the hard drive

to the drive carrier, then remove the drive from the carrier.

Caution

Before you remove a failed drive, use the appropriate software and

utilities installed on the server to stop all activity on the failed drive.

Instructions for using the software are provided by the software

manufacturer. Failure to do so may destroy the data on the drive.

Drive status

LED

Drive latch

8510702.book Page 81 Thursday, July 7, 2005 11:21 AM

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 277 278

Keine Kommentare

Gateway 9715 Bedienungsanleitung Seite 86